Power Epoxy 1min and 5min Instant Mix Syringe

Features and Benefits

Pattex Power Epoxy Instant Mix in the instant syringe gives you the high bonding performance you need for almost any material and repair. It dries very fast and transparently and won’t expand or shrink when curing. Resistant to water, oil and common solvents, Pattex Power Epoxy Instant Mix can be used both outdoors and indoors and you can also paint, sand, polish and even drill it!

Pattex Power Epoxy Instant Mix in the tube exists in 1 minute for a strong and very fast bond and in 5 minutes if you want to take the time to get things just right.

 

Main product benefits:

  • Fast curing
  • Cures crystal clear
  • Non-yellowing
  • Dishwasher-save

 

Content:

  • 6ml
  • 11ml

 

Application areas:

It is a high-performance, two-part, solvent-free epoxy adhesive that not only bonds materials, such as glass, fiberglass, cork, wood, ceramics, metals, plastics (except PP, PE and Teflon®) stone, marble and concrete…

  • Wood
  • Ceramique
  • Plastic

 

Storage:

Product should be stored at a temperature between 10 ºC and 30 ºC.

Storage time:

2 years if kept closed in its original container, under the above mentioned conditions. After this time, product may still be suitable for use, but it is recommended to check it or to ask our Technical Service.

Product Features

Tips & Tricks:

Clean before it gets hard

Even if you work with the utmost precision, some Pattex Epoxy can still go where you don’t quite want it to go. In this case use ethanol, or any other universal solvent, to clean any adhesive remains before they get hard.

 

Once hardened

Even if you know what you’re doing, mistakes can sometimes happen. And you most realize what went wrong when everything’s done. Once hard, Pattex Epoxy glues can only be removed mechanically. The best thing to do is use a scraper. But be sure to consult the instructions, so you know exactly what you’re doing.

 

Read the instructions

Before gluing anything together, take a moment to read the instructions included with the product. We really recommend you consult and follow the technical, safety and environmental information before using. It just makes more sense that way.

STEP BY STEP

1. Make sure surfaces are clean, dry and free of grease or dust. If you can, roughen the surfaces, so the bond is stronger.

2. Press the static mixer onto the syringe, and press the piston to mix the components together.

3. Apply the double-component mixture to one of the surfaces and join to the other surface.

4. At room temperature, you only have 30 seconds after mixing the components to join the surfaces.

5. After one minute, the bond is strong enough to allow for normal use again. You can exert stress after 2 hours, and objects are fully cured after 24 hours.